Autopatcher starts but gives errors on both download and install

Requests for help go in here.
vkozak
Posts: 8
Joined: Mon Nov 07, 2016 4:55 pm

Autopatcher starts but gives errors on both download and install

Postby vkozak » Wed Nov 09, 2016 6:58 pm

Hi All. I got autopatcher to start by moving all the bin files to the main autopatcher directory but now get errors when selecting either download or install options. The error log for the install option is log 1 and the error file for the download option is log 2. Thanks for the help.
autopatcher1.log
(18.41 KiB) Downloaded 58 times
autopatcher1.log
(18.41 KiB) Downloaded 58 times
autopatcher2.log
(463 Bytes) Downloaded 54 times

User avatar
Whatacrock
Release Maintainer
Release Maintainer
Posts: 1880
Joined: Mon Oct 28, 2013 10:47 am
Location: Australia
Contact:

Re: Autopatcher starts but gives errors on both download and install

Postby Whatacrock » Thu Nov 10, 2016 12:19 am

@vkozak -- It is better to re-download the releases before posting a log. Your initial download will be full of missing updates and archives. A second run at the download should eliminate errors except those that need attention. Please download again and report your findings.

BTW there appears to be an issue with a dotNET update so will investigate and report back.
UPDATE: no issue with the dotNET update - file size and checksum match
"Now if you Sons of B*@ches got anything else to say, NOW'S THE F@#%ING TIME!!"

User avatar
TheAPGuy
Site Admin
Site Admin
Posts: 878
Joined: Sun Oct 27, 2013 12:38 am
Location: California
Contact:

Re: Autopatcher starts but gives errors on both download and install

Postby TheAPGuy » Thu Nov 10, 2016 1:51 am

yes.. always do the second run. First run completly fills up the logs with missing files.
Although the "Couldn't resolve host" errors are troubling. Usually on the users side though. Again they clear up on the second run.

Error Detected: File not found in ReleaseIntegrity.IndexRTIFiles At Line 112 <--- this error intrigues me and I will look into it. It should have listed the file it did not find.

edit: I found the reason it didn't list the missing file and corrected it. Next version release will have that patched. Where that error is though is puzzling. That is where it unzips the RTIZ and then tries to open the RTI file. If its missing... the name of the rti inside the zip might be different then the RTIZ and so that could be the answer however I checked the RTIZs that were in his log and I didn't see any issues so I am not sure. It could also have been a badly downloaded zip. AP can't know if the zip uncompressed successfully (because its unzipped via commandline) except to look for the expected file.

vkozak
Posts: 8
Joined: Mon Nov 07, 2016 4:55 pm

Re: Autopatcher starts but gives errors on both download and install

Postby vkozak » Thu Nov 10, 2016 5:15 pm

It took several downloads but it seems to have properly downloaded all the files. I continue to have the same RTI file error, however (log attached). Should I try a fresh download or wait for the next version?
autopatcher.log
(1.46 KiB) Downloaded 12 times

vkozak
Posts: 8
Joined: Mon Nov 07, 2016 4:55 pm

Re: Autopatcher starts but gives errors on both download and install

Postby vkozak » Thu Nov 10, 2016 5:19 pm

autopatcher.log
(1.46 KiB) Downloaded 9 times

User avatar
TheAPGuy
Site Admin
Site Admin
Posts: 878
Joined: Sun Oct 27, 2013 12:38 am
Location: California
Contact:

Re: Autopatcher starts but gives errors on both download and install

Postby TheAPGuy » Fri Nov 11, 2016 12:47 am

hold on vkozak new version coming soon... today... maybe.


Return to “Help”

Who is online

Users browsing this forum: No registered users and 1 guest